RedBoot> exec 0xa0218000 -c "snoc=eloSytt11,00025oor d/=tn/vei sfob=p pto=memM821"
Using base address 0x00218000 and length 0x0018f75c
Uncompressing Linux.......................................................................................................... done, booting the kernel.
<5>Linux version 2.6.18-rc2 (buytenh@psi.wantstofly.org) (gcc version 4.0.1) #97 Thu Aug 10 02:00:49 CEST 2006
CPU: XScale-80219 [69052e30] revision 0 (ARMv5TE), cr=000039ff
Machine: Thecus N2100
Memory policy: ECC disabled, Data cache writeback
<7>On node 0 totalpages: 32768
<7>  DMA zone: 32768 pages, LIFO batch:7
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Built 1 zonelists.  Total pages: 32768
<5>Kernel command line: console=ttyS0,115200 root=/dev/nfs ip=bootp mem=128M
PID hash table entries: 1024 (order: 10, 4096 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
<6>Memory: 128MB = 128MB total
<5>Memory: 126464KB available (2753K code, 511K data, 104K init)
<7>Calibrating delay loop... 593.10 BogoMIPS (lpj=2965504)
Mount-cache hash table entries: 512
<6>CPU: Testing write buffer coherency: ok
<6>NET: Registered protocol family 16
<6>PCI: bus0: Fast back to back transfers disabled
<6>n2100_pci_map_irq(c0484800, 1 1)
<6>n2100_pci_map_irq(c0484400, 2 1)
<6>n2100_pci_map_irq(c0484000, 3 1)
<6>n2100_pci_map_irq(c04bec00, 4 1)
<6>n2100_pci_map_irq(c04be800, 4 2)
<6>n2100_pci_map_irq(c04be400, 4 3)
<5>SCSI subsystem initialized
<6>usbcore: registered new driver usbfs
<6>usbcore: registered new driver hub
<6>NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
<6>TCP: Hash tables configured (established 4096 bind 2048)
<6>TCP reno registered
<4>NetWinder Floating Point Emulator V0.97 (double precision)
<6>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<6>JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
<6>SGI XFS with ACLs, security attributes, no debug enabled
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
<6>Intel(R) PRO/1000 Network Driver - version 7.1.9-k2-NAPI
<6>Copyright (c) 1999-2006 Intel Corporation.
<6>e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
<6>e100: Copyright(c) 1999-2005 Intel Corporation
<7>eth0: Identified chip type is 'RTL8169'.
<6>eth0: r10001.02, the Linux device driver for Realtek Ethernet Controllers at 0xfe000000, 10:fd:14:00:00:00, IRQ 27
<6>eth0: Auto-negotiation Enabled.
<6>eth0: 10Mbps Half-duplex operation.
Realtek RTL8169/8110 Family Gigabit Ethernet Network Adapter
Driver version:1.02
Released date:2006/02/23
Link Status:Not Linked
I/O Base:0xFE000000(I/O port)
IRQ:27
<7>eth1: Identified chip type is 'RTL8169'.
<6>eth1: r10001.02, the Linux device driver for Realtek Ethernet Controllers at 0xfe000400, 10:fd:14:00:00:00, IRQ 28
<6>eth1: Auto-negotiation Enabled.
<6>eth1: 10Mbps Half-duplex operation.
Realtek RTL8169/8110 Family Gigabit Ethernet Network Adapter
Driver version:1.02
Released date:2006/02/23
Link Status:Not Linked
I/O Base:0xFE000400(I/O port)
IRQ:28
<5>physmap platform flash device: 01000000 at f0000000
<7>CFI: Found no physmap-flash.0 device at location zero
<3>physmap-flash physmap-flash.0: map_probe failed
<5>usbmon: debugfs is not available
<6>ehci_hcd 0000:00:04.2: EHCI Host Controller
<6>ehci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
<3>ehci_hcd 0000:00:04.2: can't setup
<6>ehci_hcd 0000:00:04.2: USB bus 1 deregistered
<3>ehci_hcd 0000:00:04.2: init 0000:00:04.2 fail, -110
<4>ehci_hcd: probe of 0000:00:04.2 failed with error -110
<6>USB Universal Host Controller Interface driver v3.0
<6>PCI: VIA IRQ fixup for 0000:00:04.0, from 28 to 12
<6>uhci_hcd 0000:00:04.0: UHCI Host Controller
<6>uhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1
<6>uhci_hcd 0000:00:04.0: irq 28, io base 0xfe000800
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 0 ports detected
<6>PCI: VIA IRQ fixup for 0000:00:04.1, from 27 to 11
<6>uhci_hcd 0000:00:04.1: UHCI Host Controller
<6>uhci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
<6>uhci_hcd 0000:00:04.1: irq 27, io base 0xfe000820
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 0 ports detected
<6>Initializing USB Mass Storage driver...
<6>usbcore: registered new driver usb-storage
<6>USB Mass Storage support registered.
<6>mice: PS/2 mouse device common for all mice
<6>i2c /dev entries driver
<6>md: raid0 personality registered for level 0
<6>md: raid1 personality registered for level 1
<6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: bitmap version 4.39
<6>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
<6>TCP bic registered
<6>NET: Registered protocol family 1
<6>NET: Registered protocol family 17
<4>usb usb1: Controller not stopped yet!
<4>usb usb2: Controller not stopped yet!
<5>Sending BOOTP requests ......