Uncompressing Linux................................................................................................................... done, booting the kernel. Linux version 2.6.18-rc6 (buytenh@phi.wantstofly.org) (gcc version 4.0.1) #81 Sun Sep 10 22:57:43 CEST 2006 CPU: XScale-80219 [69052e30] revision 0 (ARMv5TE), cr=0000397f Machine: Thecus N2100 Memory policy: ECC disabled, Data cache writeback CPU0: D VIVT undefined 5 cache CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets Built 1 zonelists. Total pages: 32768 Kernel command line: console=ttyS0,115200 root=/dev/nfs ip=bootp PID hash table entries: 1024 (order: 10, 4096 bytes) Console: colour dummy device 80x30 Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 30 ... MAX_LOCKDEP_KEYS: 2048 ... CLASSHASH_SIZE: 1024 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 8192 ... CHAINHASH_SIZE: 4096 memory used by lock dependency info: 696 kB per task-struct memory footprint: 1200 bytes ------------------------ | Locking API testsuite: ---------------------------------------------------------------------------- | spin |wlock |rlock |mutex | wsem | rsem | -------------------------------------------------------------------------- A-A deadlock: ok | ok | ok | ok | ok | ok | A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | double unlock: ok | ok | ok | ok | ok | ok | initialize held: ok | ok | ok | ok | ok | ok | bad unlock order: ok | ok | ok | ok | ok | ok | -------------------------------------------------------------------------- recursive read-lock: | ok | | ok | recursive read-lock #2: | ok | | ok | mixed read-write-lock: | ok | | ok | mixed write-read-lock: | ok | | ok | -------------------------------------------------------------------------- hard-irqs-on + irq-safe-A/12: ok | ok | ok | soft-irqs-on + irq-safe-A/12: ok | ok | ok | hard-irqs-on + irq-safe-A/21: ok | ok | ok | soft-irqs-on + irq-safe-A/21: ok | ok | ok | sirq-safe-A => hirqs-on/12: ok | ok | ok | sirq-safe-A => hirqs-on/21: ok | ok | ok | hard-safe-A + irqs-on/12: ok | ok | ok | soft-safe-A + irqs-on/12: ok | ok | ok | hard-safe-A + irqs-on/21: ok | ok | ok | soft-safe-A + irqs-on/21: ok | ok | ok | hard-safe-A + unsafe-B #1/123: ok | ok | ok | soft-safe-A + unsafe-B #1/123: ok | ok | ok | hard-safe-A + unsafe-B #1/132: ok | ok | ok | soft-safe-A + unsafe-B #1/132: ok | ok | ok | hard-safe-A + unsafe-B #1/213: ok | ok | ok | soft-safe-A + unsafe-B #1/213: ok | ok | ok | hard-safe-A + unsafe-B #1/231: ok | ok | ok | soft-safe-A + unsafe-B #1/231: ok | ok | ok | hard-safe-A + unsafe-B #1/312: ok | ok | ok | soft-safe-A + unsafe-B #1/312: ok | ok | ok | hard-safe-A + unsafe-B #1/321: ok | ok | ok | soft-safe-A + unsafe-B #1/321: ok | ok | ok | hard-safe-A + unsafe-B #2/123: ok | ok | ok | soft-safe-A + unsafe-B #2/123: ok | ok | ok | hard-safe-A + unsafe-B #2/132: ok | ok | ok | soft-safe-A + unsafe-B #2/132: ok | ok | ok | hard-safe-A + unsafe-B #2/213: ok | ok | ok | soft-safe-A + unsafe-B #2/213: ok | ok | ok | hard-safe-A + unsafe-B #2/231: ok | ok | ok | soft-safe-A + unsafe-B #2/231: ok | ok | ok | hard-safe-A + unsafe-B #2/312: ok | ok | ok | soft-safe-A + unsafe-B #2/312: ok | ok | ok | hard-safe-A + unsafe-B #2/321: ok | ok | ok | soft-safe-A + unsafe-B #2/321: ok | ok | ok | hard-irq lock-inversion/123: ok | ok | ok | soft-irq lock-inversion/123: ok | ok | ok | hard-irq lock-inversion/132: ok | ok | ok | soft-irq lock-inversion/132: ok | ok | ok | hard-irq lock-inversion/213: ok | ok | ok | soft-irq lock-inversion/213: ok | ok | ok | hard-irq lock-inversion/231: ok | ok | ok | soft-irq lock-inversion/231: ok | ok | ok | hard-irq lock-inversion/312: ok | ok | ok | soft-irq lock-inversion/312: ok | ok | ok | hard-irq lock-inversion/321: ok | ok | ok | soft-irq lock-inversion/321: ok | ok | ok | hard-irq read-recursion/123: ok | soft-irq read-recursion/123: ok | hard-irq read-recursion/132: ok | soft-irq read-recursion/132: ok | hard-irq read-recursion/213: ok | soft-irq read-recursion/213: ok | hard-irq read-recursion/231: ok | soft-irq read-recursion/231: ok | hard-irq read-recursion/312: ok | soft-irq read-recursion/312: ok | hard-irq read-recursion/321: ok | soft-irq read-recursion/321: ok | ------------------------------------------------------- Good, all 218 testcases passed! | --------------------------------- Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 128MB = 128MB total Memory: 124928KB available (2997K code, 1796K data, 112K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 PCI: bus0: Fast back to back transfers disabled SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 5, 163840 bytes) TCP bind hash table entries: 2048 (order: 4, 90112 bytes) TCP: Hash tables configured (established 4096 bind 2048) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc. SGI XFS with ACLs, security attributes, no debug enabled io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xfe800000 (irq = 0) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Intel(R) PRO/1000 Network Driver - version 7.1.9-k4-NAPI Copyright (c) 1999-2006 Intel Corporation. e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation r8169 Gigabit Ethernet driver 2.2LK loaded eth0: RTL8169 at 0xc8850200, 00:14:fd:10:27:72, IRQ 27 r8169 Gigabit Ethernet driver 2.2LK loaded eth1: RTL8169 at 0xc8852300, 00:14:fd:10:27:73, IRQ 28 physmap platform flash device: 01000000 at f0000000 physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank Intel/Sharp Extended Query Table at 0x0031 Using buffer write method cfi_cmdset_0001: Erase suspend on write enabled cmdlinepart partition parsing not available Searching for RedBoot partition table in physmap-flash.0 at offset 0xfe0000 6 RedBoot partitions found on MTD device physmap-flash.0 Creating 6 MTD partitions on "physmap-flash.0": 0x00000000-0x00040000 : "RedBoot" 0x00040000-0x00d40000 : "ramdisk" 0x00d40000-0x00ea0000 : "kernel" 0x00ea0000-0x00fc0000 : "user" 0x00fc0000-0x00fc1000 : "RedBoot config" 0x00fe0000-0x01000000 : "FIS directory" usbmon: debugfs is not available PCI: VIA IRQ fixup for 0000:00:04.2, from 29 to 13 ehci_hcd 0000:00:04.2: EHCI Host Controller ehci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:04.2: irq 29, io mem 0x800a0400 ehci_hcd 0000:00:04.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected USB Universal Host Controller Interface driver v3.0 PCI: VIA IRQ fixup for 0000:00:04.0, from 28 to 12 uhci_hcd 0000:00:04.0: UHCI Host Controller uhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:04.0: irq 28, io base 0xfe000800 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PCI: VIA IRQ fixup for 0000:00:04.1, from 27 to 11 uhci_hcd 0000:00:04.1: UHCI Host Controller uhci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:04.1: irq 27, io base 0xfe000820 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice i2c /dev entries driver md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 r8169: eth0: link up r8169: eth1: link down Sending BOOTP requests . OK IP-Config: Got BOOTP answer from 10.0.0.11, my address is 10.0.0.26 IP-Config: Complete: device=eth0, addr=10.0.0.26, mask=255.255.0.0, gw=10.0.0.1, host=yesbox.wantstofly.org, domain=, nis-domain=(none), bootserver=10.0.0.11, rootserver=10.0.0.11, rootpath=/data/debian_arm md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. Looking up port of RPC 100003/2 on 10.0.0.11 Looking up port of RPC 100005/1 on 10.0.0.11 VFS: Mounted root (nfs filesystem). Freeing init memory: 112K INIT: version 2.86 booting Will now activate swap. Done activating swap. Setting the system clock.. Cannot access the Hardware Clock via any known method. Use the --debug option to see the details of our search for an access method. Cannot access the Hardware Clock via any known method. Use the --debug option to see the details of our search for an access method. System Clock set. Local time: Thu Jan 1 00:00:17 UTC 1970. Cleaning up ifupdown...done. Loading modules... All modules loaded. Setting the system clock again.. Cannot access the Hardware Clock via any known method. Use the --debug option to see the details of our search for an access method. System Clock set. Local time: Thu Jan 1 00:00:19 UTC 1970. Loading device-mapper support. Will now check all file systems. fsck 1.39 (29-May-2006) Checking all file systems. Done checking file systems. A log is being saved in /var/log/fsck/checkfs if that location is writable. Setting kernel variables ... ... done. Will now mount local filesystems. * Mounting proc filesystems failed with error code 32. nothing was mounted Done mounting local filesystems. Will now activate swapfile swap. Done activating swapfile swap. Cleaning /tmp...done. Cleaning /var/run...done. Cleaning /var/lock...done. Running 0dns-down to make sure resolv.conf is ok...done. Setting up networking...done. Setting hostname to 'n2100.wantstofly.org'...done. * /etc/network/options is deprecated. Setting up IP spoofing protection...done (rp_filter). Configuring network interfaces...done. Will now mount remote filesystems. Done mounting remote filesystems. Setting sensors limits: done. Setting up ALSA...done (none loaded). Running ntpdate to synchronize clock. Initializing random number generator...done. Recovering nvi editor sessions...none found. Setting up X server socket directory /tmp/.X11-unix.... Setting up ICE socket directory /tmp/.ICE-unix.... INIT: Entering runlevel: 2 Starting system log daemon: syslogd. Starting kernel log daemon: klogd. Starting MTA: exim4. Starting internet superserver: inetd. Starting NBD client process: FATAL: Module nbd not found. Connecting...Activating... nbd-client. Starting OpenBSD Secure Shell server: sshd. Setting up X font server socket directory /tmp/.font-unix...done. Starting X font server: xfs. Starting anac(h)ronistic cron: anacron. Starting deferred execution scheduler: atd. Starting periodic command scheduler.... Debian GNU/Linux testing/unstable n2100.wantstofly.org ttyS0 n2100.wantstofly.org login: